IMPREPOX 1000

Impregnator with two components, specially suited to the sealing and filling of microcracks capillaries present in expensive marble and granite

IMPREPOX 1000

Revolutionary impregnator with two components, specially suited to the sealing and filling of microcracks capillaries present in expensive marble and granite, which if not repaired perfectly and invisibly would be unusable and wasted thus causing big loss for the operator.

  • Method of use :

    The parts to be bonded or filled must be clean, completely dry and free of dust; if possible, roughen them slightly. Mix thoroughly the two dosed components, in the ratio (by weight) of 4 : 1 (A : B), using small quantities of product in order to avoid waste from too fast curing (mass effect). For a good job, usually 250-300 grams (8-11 oz per mixing) at a time are sufficient per single catalysis. The mix has a workable time of 20/30 minutes at 20°C/68°F, the time will be longer at lower rooms temperature and shorter at higher room temperature. Grinding can be done after 24 hours at room temperature (20°C/68°F).

Information request
 *  I consent to the processing of data in accordance with EU Regulation 2016/679. Complete information
Recommended products

Preparato Speciale, paste wax

Paste wax with exceptional polishing and protective power to polish marble and granite

LUCIDO

Liquid silicone polisher and color enhancer for marble, granite, stones with polished finish.

IDEA HP

Antistain protective agent, natural effect, water & oil proof, for marble, granite & stones

IDEA XC

Antistain protective agent, wet look effectwater oil proof, for marble, granite & stones.