Block D70 ECO+

BLOCK D70 ECO +

Water based antistain indicated for the protection of both horizontal and vertical surfaces. Protects materials from water and humidity-based stains, oils, greases and fats from penetrating surface. Treated surface maintain breathability allowing interior moisture to escape, while avoiding external surface absorption. BLOCK D70 ECO+ reduces the formation of mold and mildew. The product meets the requirements of US EPA 24/SCAQMD RULE 304-91. Product tested under ISO 4892-2/ASTM G155 (UV resistance).

Method of use :
Follow below indications, before proceeding with complete product application. Ensure that surfaces to be treated are clean, free of dirt, dust, grime and surface incrustations. Cover and protect all surrounding areas before proceeding with application.
MANUAL USE: product is ready for use. Product can be applied to humid surfaces. Apply a coat of product uniformly using a soft bristled brush, microfiber cloth, wax applicator or a roller to material. Allow surface to absorb product for 3-5 minutes before applying a second coat of product (where needed). Remove all eventual excess product, pooling or residues within 15 minutes using a clean cotton cloth, dry roller or microfiber, until all excess product is absorbed.
AIRLESS (SPRAY): using a low pressured hand-held spray or airless, apply product maintaining a distance from surface of 20-25 cm. Allow product to be absorbed into surface before applying a second coat as indicated above. On vertical surfaces, apply two coats of product wet on wet. Start at the bottom and work the way up. Dry up and remove eventual product drips. Place tarp or plastic protective sheeting below the treated area to catch eventual drips.
Coverage:
Estimate coverage per litre of product: 15/25 sqm (160-300 sq ft).
Coverage depends on texture and porosity of the surface